Fisher Snowplow Blade Accessories

Engineered specifically to complement your FISHER^® snow plow blade, the SnoFoil's high, continuous curve funnels snow to the side, allowing snow to be piled higher.
7-1/2' - 9' RD & HD Series : #27100
9' MC Series : #22380
10' MC Series : #22200

POLY SnoFoil for the HT Series^® blade features heavy-duty polyethylene construction to withstand tough plowing conditions.
7-1/2' HT Series : #69660

Deflectors extend the height of your blade to keep snow off the windshield and away from the radiator, without affecting your ability to stack snow. CALL TO ORDER.
6' 9" LD Series : #22269
7-1/2' LD & RD Series : #283
8' HD Series : #26480
8-1/2' HD Series : #26485
9' HD Series : #26490

Made from 2-ply rubber, this deflector is available for the following blades:
7-1/2' - 9' : #22470-1
7-1/2' HT' : #69605
8-1/2' EZ-V^® plow (2 sections) : #21619
9-1/2' EZ-V^® plow (2 sections) : #26572
8' & 9' XBLADE^TM : #27600
9' & 10' MC Series : #22390

EXTREME VEE RUBBER DEFLECTOR
7 1/2' - 9 1/2' XTREMEV : #44710

Made of tough 1090 high carbon steel, these replaceable cutting edges increase wear resistance and improve cutting power and scraping ability. CALL TO ORDER.
7-1/2' LD & RD Series : #5532
8' HD Series : #5533
8-1/2' HD Series : #26460
9' HD Series : #5534
8-1/2' EZ-V^® plow (2 sections) : #28408
9-1/2' EZ-V^® plow (2 sections) : #26593
8' XBLADE^TM : #27580
8-1/2 XBLADE^TM : #27585
9' XBLADE^TM : #27590
9' MC Series : #27362
10' MC Series (2 sections) : #27239

Made of tough polymer material, these replaceable cutting edges were designed to complement HS and LD Series blades by improving scraping ability while adding less weight to the blade. The ploymer material also helps absorb plowing shock.
6-1/2' HS Series : #5094
6' 9" LD Series : #22215
7' HS Series : #5485
7-1/2' LD Series : #22216

For use on our lighter weight plows where surfaces are rocky and/or abrasive. This kit will extend the life of the polymer style cutting edges. Two separate kits are available.
HS Blades : #20505
LD/SD/HT Blades : #27880
LD Blades : #26145
XLS/Xtreme V Blades : #50700

Fluorescent orange, 24" long and made from thick 3/4" nylon tubing, these guides bolt-on in place of standard guides.
#20254K

If backdragging is part of your plowing requirements, optimize your performance by adding these, simple to bolt-on 1/4" edges to your XtremeV plow. (XtremeV backdrag edge is not compatible with curbguard or shoe kits). CALL TO ORDER.

Extend the length and improve the overall operating performance of your plow by adding a pair of blade wings. Wings extend at a 35 degree angle, increasing the overall length of each blade wing by 6". CALL TO ORDER.
#44610-1

Attractive,"off-season" bumper/grille guard designed for use with either the FISHER Minute Mount or Minute Mount 2 System pushplates. Easy 10 minute bolt-on installation and no drilling required. Mounting brackets double as pushplate covers/skid plates and includes tabs for mounting auxiliary fog lamps. Powder coated or chrome plated. FOG LAMPS NOT INCLUDED.
CALL TO ORDER.
Black Powder Coated : #26240
Stainless Steel : #26239

Fluorescent orange, 24" long and made from thick 3/4" nylon tubing, these guides bolt-on in place of standard guides.
#26530K

This kit offers extra cutting edge wear protection as well as blade edge protection when plowing up against curbings.
#27222

Protect the outer edge of your snowplow from the wear and tear associated with sidewalks and curbs, with this simple, bolt-on curb guard kit.
#44406

This quick release, flexible control mount adjusts into any position. The magnetic base allows for easy removal plus it eliminates the standard mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.
#62490